Tips for Identifying and Removing Ice Dams

Tips for Identifying and Removing Ice Dams

The roof is one of the most important parts of any building. It’s also one of the most sensitive. It’s susceptible to damages from the increased exposure to the elements. The roof is prone to ice dams too, which explains why Minneapolis ice dam removal is a highly sought after service in this part of the country. Fortunately, anybody can learn not only to identify but also remove ice dams on the roof of any building in Minneapolis without necessarily hiring an expert roofer.

So, here’s what you ought to do:

Know Where Ice Dams Occur

First, it pays to know the parts of the roof where ice dams are most likely to develop. The dams occur when melting snow turns into water, which then freezes to form ice at the roofline’s edge. You will mostly find them around the edges of the roof. The location of the ice dams is not set in stone. They can arise in other areas too. The place where you eventually see the dams depends on several factors, which include the following:

  1. Slope of the roof
  2. Orientation of the roof
  3. Style of the roof

Know How to Identify Ice Dams

Now that you know where to look for ice dams, your next task is to know how to identify them. The icicles around your home’s exterior are worth checking. There is no reason to worry about the formation of ice dams when you notice the icicles limited to the gutters without any water behind them. Often, icicles are precursors to the formation of ice dams. Therefore, do not ignore the icicles but take immediate remedies to have them removed by professionals.

It is highly probably that an attic with plenty of moisture and water stains has enough ice dams to cause extensive damages. Focus your investigation around the attic. The exterior walls of the building, especially along the ceiling, also deserve some inspection to check if they are full of moisture or water stains. In fact, the presence of moisture or water stains should tell you that not only has an ice dam formed, but also water has successfully penetrated the roofing membrane.

Know How to Remove Ice Dams

Next, your goal is to eliminate the ice dams. For this, you have to use a roof rake for removing snow between 3ft and 4ft from its edge. Take care to avoid damaging the roof any further or block emergency exits. You also need calcium chloride to melt the ice. Sodium chloride and rock salt are not recommended as they are capable of damaging the roof. Fill this substance into a nylon stocking, which you should then position vertically on the roof to melt the ice.

While at it, avoid destroying the shrubbery and plants on or around the roof by covering them as long as the stocking filled with calcium chloride is on the roof. Otherwise, the droppings from the ice melt product might cause untold damages to your plants. As this shows, you can do the Minneapolis ice dam removal alone. If unsure of the effectiveness of your ice dam removal skills, do not hesitate to hire a true professional.